Embark on the journey of dwelling safety with ease as we information you thru the set up of your Ring Doorbell. This modern addition to the doorstep will elevate your peace of thoughts, offering real-time monitoring and communication with guests proper out of your fingertips. Whether or not you are a seasoned DIY fanatic or a tech novice, we’re right here to make sure your set up course of is clean and seamless. Let’s step into the world of sensible dwelling safety and improve your private home’s safety with the Ring Doorbell.
Earlier than embarking on this thrilling endeavor, collect your instruments and put together the doorstep. You may want a drill, a screwdriver, a stage, and a handful of screws and anchors. It is important to pick the proper mounting bracket on your kind of floor, whether or not it is brick, wooden, stucco, or vinyl siding. Along with your instruments on the prepared, you are one step nearer to experiencing the comfort and safety of the Ring Doorbell.
Now, let’s dive into the set up. First, decide the optimum placement on your doorbell, contemplating each performance and aesthetics. Maintain the mounting bracket in opposition to the wall and use the extent to make sure it is completely aligned. Mark the screw holes with a pencil, then take away the bracket and proceed to drill pilot holes at every mark. Insert the anchors into the holes and safe the mounting bracket utilizing the supplied screws. Lastly, connect the Ring Doorbell to the bracket and gently push it into place. Now, sit again and relish the peace of thoughts that comes with a safe dwelling.
Putting in the Mounting Bracket
The Ring Doorbell comes with a mounting bracket that should be put in earlier than you possibly can mount the doorbell itself. The bracket is designed to be hooked up to the wall or door body utilizing 4 screws. The screws are included within the bundle.
- Select a location for the doorbell. The best location is close to the entrance door, the place it is going to be simple to see and listen to. Be certain the placement can be protected against the climate.
- Place the mounting bracket on the wall or door body. Use a pencil to mark the 4 screw holes.
- Drill pilot holes on the 4 marks. The pilot holes needs to be barely smaller than the screws.
- Insert the screws into the pilot holes and tighten them till the bracket is securely hooked up.
| Screw Measurement | Pilot Gap Measurement |
|---|---|
| #6 | 1/16 inch |
| #8 | 5/64 inch |
| #10 | 3/32 inch |
4. Leveling the Mounting Bracket
As soon as the mounting bracket is hooked up, it is very important stage it. It will make sure that the doorbell is mounted straight and stage.
To stage the mounting bracket, use a stage to test the bracket each horizontally and vertically. If the bracket shouldn’t be stage, loosen the screws and alter the bracket till it’s stage. Then, tighten the screws.
5. Connecting the Wires
In case you are connecting the Ring Doorbell to an present doorbell system, you have to to attach the wires from the doorbell to the terminals on the mounting bracket.
The terminals are color-coded: pink for constructive, black for detrimental, and white for the entrance door chime.
To attach the wires, merely insert the ends of the wires into the corresponding terminals and tighten the screws.
6. Mounting the Doorbell
As soon as the mounting bracket is put in and the wires are related, you possibly can mount the Ring Doorbell to the bracket.
To mount the doorbell, merely align the doorbell with the bracket and slide it down till it clicks into place.
As soon as the doorbell is mounted, you need to use the Ring app to set it up and join it to your Wi-Fi community.
Connecting with Google Assistant
To attach your Ring Video Doorbell to Google Assistant, observe these steps:
1. Join Ring to the Google Assistant App
Open the Google Assistant app in your cellphone or pill.
Faucet the menu icon within the top-left nook.
Faucet “Settings.”
Scroll down and faucet “Providers.”
Faucet “Video Doorbells.”
Faucet “Ring.”
Faucet “Hyperlink Account.”
Enter your Ring login credentials.
Faucet “Signal In.”
Faucet “Permit.”
2. Allow the Ring Doorbell in Google Assistant
After getting linked your Ring account to Google Assistant, you have to to allow the Ring Doorbell ability.
Open the Google Assistant app.
Faucet the menu icon within the top-left nook.
Faucet “Settings.”
Scroll down and faucet “Providers.”
Faucet “Video Doorbells.”
Faucet “Ring.”
Toggle the change subsequent to “Allow.”
3. Use Google Assistant to Management Your Doorbell
As soon as the Ring Doorbell ability is enabled, you need to use Google Assistant to regulate your doorbell with voice instructions.
Listed below are some examples of voice instructions you need to use:
| Command | Motion |
|---|---|
| “Hey Google, present me the entrance door.” | Reveals a dwell view of the entrance door in your cellphone or pill. |
| “Hey Google, speak to the entrance door.” | Opens a two-way audio name with the individual on the door. |
| “Hey Google, reply the entrance door.” | Solutions the door and unlocks it (if the Ring Doorbell is related to a appropriate sensible lock). |
| “Hey Google, hold up the entrance door.” | Ends the two-way audio name with the individual on the door. |
Find out how to Set up Ring Door Bell
Putting in a Ring Door Bell is a comparatively simple course of that may be accomplished in just a few hours. To get began, you will want to collect the next supplies:
- Ring Door Bell
- Screwdriver
- Drill
- Drill bit
- Degree
- Wrench
- Electrical tape
After getting your entire supplies, you possibly can start the set up course of. First, you will want to decide on a location on your Ring Door Bell. The best location is close to your entrance door, the place it is going to be capable of see anybody who approaches. As soon as you’ve got chosen a location, you possibly can start to mount the doorbell.
To mount the doorbell, you will have to drill two holes into the wall. The holes needs to be about 3 inches aside and stage. As soon as you’ve got drilled the holes, you possibly can insert the included screws and tighten them till the doorbell is safe.
As soon as the doorbell is mounted, you possibly can join the wires. The Ring Door Bell has two wires: an influence wire and a floor wire. The ability wire needs to be related to the constructive terminal in your doorbell transformer, and the bottom wire needs to be related to the detrimental terminal. As soon as the wires are related, you possibly can check the doorbell to verify it is working correctly.
