In case your brake lights aren’t working, it may very well be an indication of a defective brake gentle swap. This swap is liable for sending a sign to the brake lights when the brake pedal is depressed. Changing a brake gentle swap is a comparatively easy restore that may be accomplished in about half-hour. On this article, we are going to give you step-by-step directions on how one can substitute the brake gentle swap on a 2007 Audi A4.
Earlier than you start, you have to to assemble a couple of instruments. These instruments embrace a 10mm socket wrench, a flathead screwdriver, and a brand new brake gentle swap. After you have gathered your instruments, you possibly can start the restore. First, find the brake gentle swap. It’s situated on the brake pedal meeting, simply above the brake pedal. After you have situated the swap, use the 10mm socket wrench to take away the 2 bolts that maintain it in place. Subsequent, use the flathead screwdriver to disconnect {the electrical} connector from the swap. Lastly, set up the brand new brake gentle swap and tighten the bolts. Take a look at the brake lights to make it possible for they’re working correctly.
Changing the brake gentle swap on a 2007 Audi A4 is an easy restore that may be accomplished in about half-hour. By following the steps outlined on this article, it can save you your self the price of having the restore finished by a mechanic. When you have any questions on this restore, please be at liberty to depart a remark beneath.
The right way to Set up Brake Gentle Swap in a 2007 Audi A4
The brake gentle swap is a vital element that illuminates the brake lights when the brake pedal is pressed. This is a step-by-step information to changing this swap in a 2007 Audi A4:
1. **Security First**: Park the car on a stage floor and have interaction the parking brake. Flip off the engine and take away the important thing from the ignition.
2. **Find the Swap**: The brake gentle swap is often positioned on the firewall, above the brake pedal. You’ll be able to simply entry it from the inside of the automobile.
3. **Disconnect the Connector**: Attain behind the swap and press the discharge tab to disconnect {the electrical} connector.
4. **Take away the Swap**: Use a 10mm socket wrench to unbolt the swap from the firewall. Watch out to not drop the bolt contained in the engine bay.
5. **Set up the New Swap**: Clear the mounting floor on the firewall to make sure a correct seal. Place the brand new swap in place and tighten the bolt utilizing a 10mm socket wrench.
6. **Reconnect the Connector**: Plug {the electrical} connector again into the swap securely.
7. **Take a look at the Lights**: Begin the engine and press the brake pedal to confirm that the brake lights are functioning accurately.
Folks Additionally Ask About 2007 Audi A4 Brake Gentle Swap
How lengthy does it take to switch a brake gentle swap?
The brake gentle swap set up sometimes takes round 30-45 minutes.
What are the signs of a defective brake gentle swap?
Widespread signs embrace brake lights that stay illuminated when the pedal will not be depressed, brake lights that do not come on, or intermittent operation of the brake lights.
Can I substitute the brake gentle swap myself?
Sure, changing the brake gentle swap is a comparatively simple job that may be carried out with primary instruments and data.
Is it secure to drive with a defective brake gentle swap?
It isn’t advisable to drive with a defective brake gentle swap as it may compromise your car’s security and result in visitors violations.
